Make the desired mold and spray it with a nonstick spray. For thicker walls, use consecutive layers with a maximum thickness of 5mm between them. Otherwise, the surface should be sanded and dust removed before applying the second coat. The second coat should be applied within the first coat's drying time. Use the bare minimum required to level the floor, with a maximum thickness of 2mm. Depending on the application, a spatula or roller should be used. Stir the material from the walls and the bottom with a spatula to ensure complete homogenization of the mixture. They must also be dry and not subject to rising humidity.Īdd component B to component A and thoroughly mix for at least 2 - 3 minutes on low speed. PLANOCOLOR LIQUID GLASS must be applied to clean surfaces that are free of materials that prevent adhesion, such as fats, oils, dust, and loose materials. On internal areas such as floors, benches, wet areas, PLANOCOLOR LIQUID GLASS can be used as binder resin for the creation of stone carper coverings mixed with appropriate PLANOCOLOR GRANULATES. Mixed with NOVACOLOR UNIVERSAL pigments in liquid form it creates an ‘abstract art’ resin flooring where, due to the clarity of the resin, “depth” of each layer is visible. It can be mixed with NOVAGLITTER (glitter enhanced pigments in powder form) in order to create epoxy flooring with the corresponding color and glitter (see NOVAGROUT DECO EPOXY color chart). PLANOCOLOR LIQUID GLASS works perfectly with PLANOCOLOR PREMIUM microcement coatings as surface protection of painted floorings on floors where PLANOCOLOR PREMIUM was used as a canvas. In order to create background in different colors, apply a PLANOFLOOR EPX layer first. In order to create a white background prior to the incorporation of objects, it can be mixed 50 – 100% with the white powder H330. Application should be made on surfaces protected from UV radiation, without rising humidity and properly primed. It is a crystal clear resin which is used for surface protection of floors or for the incorporation of objects in its mass, such as pebbles, 3D prints, photos, fiber optic, LED on kitchen benches, tables, bars, floor paintings. Two-component self-leveling epoxy resin free of solvent (VOC = 0g/L) with “liquid glass” appearance.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |